products

Pressure/Manual Valves & Water Management

Pressure/Manual Valves & ...

Mechanical Valve

  • Type Gate / butterfly / ball

  • Size (inch) 2’’ – 24’’

  • Pattern Globe, straight

  • Construction materials Metal, bronze, reinforced nylon (nr-010)

  • End connection Flanged, threaded, grooved Max.

  • Working pressure (psi) 230

Pressure Control Valve

Metal

  • Size (Inch) 1’’ – 12’’

  • Pattern Straight, Angle, Globe

  • Construction Materials Metal, Bronze

  • End Connection Threaded, Flanged, Grooved

  • Max. Working Pressure (PSI) 230

  • Applications Types Pressure Reducing, Pressure Sustaining & Relief, Flow Rate Control, Float Level Control, Altitude Control, Quick Reacting Pressure Relief

 

Plastic

  • Size (Inch) 3/4″ – 6″

  • Pattern Straight, Angel, Globe, Oblique (all) , Angle (3”,3”L ,4”),Tee (3”) Construction Materials Plastic, Black nylon glass filled , Polypropylene End Connection Thread/Flange/PVC Weld/ Grooved

  • Max. Working Pressure (PSI) 145

  • Application Types Pressure Reducing/Sustaining, Quick relief, Level control, Flow control

  • Typical Applications Pressure Reduction for Marginal Plots, Irrigation Machine Sprinkler Flow Control, Single Sprinkler Flow Fixation

Back Flush Valves

  • Size (Inch) 2’’ – 4’’

  • Pattern Globe, Straight, Angle

  • Construction Materials Metal, Glass-Reinforced Polyamide (GRP) End Connection Grooved / Threaded / Flange

  • Max. Working Pressure (PSI) 230 Typical

  • Applications Filter Back-Flushing

PVC Ball Valve

Solvent weld full port PVC ball valves are designed for use with SCH40 or SCH80 PVC pipe fittings. For cold water applications only. Features easy one-quarter turn operation.

  • White color, EPDM seats

  • Full water flow

Brass Valves

Threaded full port ball valves are CSA certified for use with natural, manufacturing, mixed, and liquefied petroleum and LP gas/air mixtures. The valve features a 600 psi maximum working pressure. Features easy one-quarter turn operation, and has long-lasting Teflon seats, and is made from a forged brass construction.

 

• Galvanized handle with vinyl grip

• Full water flow

• CSA certified

Brass Swing Check Valves

Brass swing check valve with 200 psi capacity functions within the temperature range of 18°C to 82° C.

 

• Threaded End Connection

• Rough Brass Body

• Brass Disk Trim

• Standards: NSF/ANSI 372

Brass Gate Valves

The threaded gate valve is designed for use in a fully open or closed position, where an in-line shut-off is required.

 

• Brass construction

• Full Port, non-rising stem

• Teflon packing, cast iron handle

• Meets NSF/ANSI 372 lead free standard

Brass Backflow Vacuum Breaker

The 0882-07NL No-Lead Self Draining Vacuum Breaker is designed to prevent back siphoning and backflow into a potable water supply. The vacuum breaker will also automatically self-drain when all hose attachments are removed, protecting the valve or faucet from freezing in colder weather. The 0882-07NL can be installed easily to any 3/4” hose faucet and comes complete with a breakaway set screw to ensure a permanent vandal-proof installation.

 

• CSA Standard B64.2 Certified

• ASSE Standard 1011 Certified

Vents/Air Valve

Our assortment of irrigation ventilation units includes air & vacuum release valve vents, continuous air valve vents, and combination air valve vents. The air vents are recommended protection for drip and micro-irrigation systems, helping to maintain proper hydraulic dynamics in the system design.

 

Each type of air vent is designed for a specific function. The air and vacuum release vent is designed to allow large volumes of air to exit during start-up and enter during shut down of an irrigation system. The continuous air vent allows small amounts of trapped air in a pipeline under pressure to be released. The combination air vent does both applications.

Pressure Regulator

Our assortment of irrigation ventilation units includes air & vacuum release valve vents, continuous air valve vents, and combination air valve vents. The air vents are recommended protection for drip and micro-irrigation systems, helping to maintain proper hydraulic dynamics in the system design.

 

Each type of air vent is designed for a specific function. The air and vacuum release vent is designed to allow large volumes of air to exit during start-up and enter during shut down of an irrigation system. The continuous air vent allows small amounts of trapped air in a pipeline under pressure to be released. The combination air vent does both applications.

Pressure Guage

Our 2.5” faced pressure gauges have a 1/4” bronze bourdon tube neck and are glycerine liquid-filled (wet gauges) or dry gauges.

 

Sizes: 0-15 psi, 0-30psi, 0-60psi, 0-100psi, 0-160psi